Cisco
Questions on Cisco Equipment
Yes, it is possible to use a Cisco 7940 or 7960, however the stock phone will not work without being flashed with Cisco SIP Software. It comes defaqult wi...
Fri, 1 Jul, 2016 at 12:55 PM
Any new Cisco 7940 or 7960 VoIP Phone will come with default SCCP voip software which is proprietary and only talks to Cisco Call Manager. Once it is flas...
Fri, 1 Jul, 2016 at 12:57 PM
This procedure changes Network configuration, Device Configuration, Volume Settings and Contrast Settings to their default values on the Cisco IP Phone 79...
Fri, 1 Jul, 2016 at 12:59 PM
Although we can easily support the older Cisco 7940 and 7960 VoIP Phones after they have been flashed with the Cisco SIP software, the new 7941 and 7961 a...
Fri, 1 Jul, 2016 at 1:00 PM
Once you have determined you have SIP and not SCCP loaded on the phone (see our article for determing this) you can proceed to program it.
Unlock th...
Fri, 1 Jul, 2016 at 1:02 PM
Press the Setup Button (just below the voicemail Box button)
Navigate to Menu Item #14 - Factory Reset, and press Select:
Select OK at the Reset Warni...
Fri, 1 Jul, 2016 at 1:06 PM
Press Setup button below the voicemail button:
Navigate to the Setup Menu item #9 - Network, and press select.
Fri, 1 Jul, 2016 at 1:09 PM
When you setup a Cisco or Grandstream ATA to simulate a SIP Trunk as a PBX account, you must use the extension Redirection on Busy to have it rollover to ...
Fri, 1 Jul, 2016 at 1:11 PM