Yealink
Questions on Yealink equipment
Yes, all models have SIP reinvites enabled by default.
Fri, 1 Jul, 2016 at 1:41 PM
Enable PRACK
From Account -> Advanced Settings
Set 100 Reliable Retransmission to “Enabled”
Fri, 1 Jul, 2016 at 1:43 PM
In the Yealink phone HTTP management interface, navigate to Phone -> Ring
In any of the available ring settings, set the Internal Ringer Text to “...
Fri, 1 Jul, 2016 at 1:44 PM
In some cases with certain routers that may be provided by the IP carrier, you may have to set the NAT Traversal setting on the Yealink phone to Keep-Aliv...
Fri, 1 Jul, 2016 at 1:45 PM
Yealink phones by default are set to do a supervised transfer. This setting does not release the call to the Strategic Voice Solutions network, but instea...
Fri, 1 Jul, 2016 at 1:46 PM
BLF keys must be manually configured. Connect to the phone’s HTTP interface and login with admin/admin (if defualt user/pw are set). Then navigate to: Ph...
Fri, 1 Jul, 2016 at 1:47 PM
Login into the web browser interface.
Go to the Accounts and then to advanced.
Change the Local SIP port from 5060 to anything else if possible since ...
Fri, 1 Jul, 2016 at 1:48 PM
Here is how it works. When setting up a BLF key with Yealink we configure 2 parameters:
1- The extension number to monitor
2- The call pickup code (*8...
Fri, 1 Jul, 2016 at 1:49 PM
By Default the Yealink Phone does a blind transfer and is not optionable for Consultive.
To do a consultive transfer, you must do the following using th...
Fri, 1 Jul, 2016 at 1:50 PM
If your Yealink phone is not ringing through the headset (wired ir wireless), you have to do two things:
1) In the Web Interface, go to the Features...
Fri, 1 Jul, 2016 at 1:50 PM